Lead Sheet for Radiation Shielding
Thai-made lead sheet from 0.6 to 10 mm, cut and fitted into the walls of X-ray rooms in clinics and hospitals across Thailand.
What is lead sheet used for?
Lead sheet is soft metal fitted inside walls to stop X-rays. Purer lead folds neatly into corners and around frames. Hospital Renovation's lead sheet is made in Thailand, and our team fits it.
- 0.6–10mm Thickness range, made to order beyond that
- Thai-made From high-purity lead, tested to standard
- Fitted Cut and installed in the walls by our own team
Sizes
Sheet sizes and weights
Weights are approximate. Other thicknesses up to 10 mm, and other sheet sizes, are made to order.
Request a quote| Thickness mm | Width cm | Length cm | Weight kg |
|---|---|---|---|
| 0.6 | 36 | 500 | 13 |
| 0.6 | 100 | 200 | 14 |
| 1.0 | 100 | 200 | 23 |
| 1.5 | 120 | 240 | 50 |
| 2.0 | 100 | 200 | 46 |
| 5.0 | 100 | 100 | 57 |
Weight
Lead sheet weight calculator
Lead weighs about 11.34 kg per square metre for every millimetre of thickness. Check a sheet before you plan the delivery and the lifting.
At the joints
Why lead sheets overlap at the joints
A gap between two sheets is a gap in the shielding, so sheets overlap behind the frame. Thailand's design manual asks that the joints around doors and windows shield as tightly as the wall.
- OverlapOne sheet runs behind the next, so no straight path gets through.
- Soft enough to foldHigh-purity lead folds into corners without cracking.
- Cut on siteOur team cuts each sheet to fit around doors and windows.
Source: Department of Health Service Support, Diagnostic Radiology design manual, 2015.
Where it goes
From dental clinics to radiotherapy
Every room with an X-ray source needs lead in its walls. These are the rooms our lead sheet goes into.
See all products- Hospital X-ray rooms
- Interventional radiology
- Nuclear medicine
- Radiotherapy
- Dental clinics
- Veterinary clinics
- Orthopaedic clinics
- Urology clinics
- Industrial X-ray
On site
Before the wall finish goes on
Every wall of this X-ray room is lined with our lead sheet, cut to fit around the door, before the finish covers it.
Questions
Lead sheet questions
Last updated 2 November 2026
What thickness of lead sheet do I need?
It depends on the machine and the direction of the beam, so it is worked out for each room. We supply lead sheet from 0.6 to 10 mm, and thicker sheet to order. Tell us the machine and we will advise you.
How much does lead sheet weigh?
About 11.34 kg per square metre for each millimetre of thickness. A 1 × 2 m sheet at 2 mm weighs about 45 kg.
What sizes does lead sheet come in?
Standard sheets run from 36 × 500 cm at 0.6 mm to 120 × 240 cm at 1.5 mm, and other thicknesses and sizes are made to order.
Is your lead sheet made in Thailand?
Yes. Our lead sheet is made in Thailand from high-purity lead and tested to standard.
Do you install lead sheet as well as supply it?
Yes. Our own team cuts the sheet and fits it into the walls, around doors and windows, before the finish goes on.
Which rooms use lead sheet?
Hospital X-ray rooms, cath labs, interventional radiology, nuclear medicine and radiotherapy, as well as dental, veterinary, orthopaedic and urology clinics and industrial X-ray.
How much does lead sheet cost?
Ask us for a price. It depends on thickness, sheet size and whether we install it. Send us the thickness and area and we will quote it.
Contact
Request a project consultation
Tell us about the room you are planning, and we will get back to you with the next steps.
- Call091-959-5935
- Call081-177-2233
- LINEChat on LINE
- Emailhospitalrenovation.n@gmail.com
- Office18 Suan Pak Rd, Chim Phli, Taling Chan, Bangkok 10170